function dw(message)
{ document.write(message); }
//Top Menu
tm01="Linksys Wireless-G PTZ Internet Camera with Audio";
tm02="Home";
tm03="View Video";
tm04="Setup";
tm05="Linksys Web";
tm06="Help";
tm07="Exit";
tm08="Copyright 2007 Cisco Systems, Inc. All rights reserved.";
tm09="Connected Users:";
tm090="Connected User:";
tm10="Image Resolution";
tm11="Preset Camera View";
tm12="Please Log In";
tm13="Username:";
tm14="Password:";
//Left Menu
lm01="Setup";
lm02="Basic";
lm03="Image";
lm04="Maintenance";
lm05="Users";
lm06="DDNS";
lm07="FTP Upload";
lm08="Options";
lm09="Pan / Tilt";
lm10="Status";
//
lm11="Setup - Basic";
lm12="Setup - Image";
lm13="Setup - Maintenance";
lm14="Setup - Users";
lm15="Setup - DDNS";
lm16="Setup - FTP Upload";
lm17="Setup - Options";
lm18="Setup - Pan/Tilt";
lm19="Setup - Status";
//Buttons
bt01="Apply";
bt02="Cancel";
bt03="Help";
bt04="Continue";
bt05="Back";
bt06="Refresh";
bt07="Submit";
bt08="Remove";
bt09="Delete";
bt10="Add »";
bt11="Reset";
bt12="Generate";
//
bt13="Change";
bt14="Clear Log";
bt15="Web Site";
//
bt16="Sync with PC";
bt17="Edit Security Settings";
bt18="Update Now";
bt19="DDNS Account";
bt20="Remove Camera";
bt21="Restore Defaults";
bt22="Upgrade Firmware";
bt23="Start Upgrade";
bt24="Set Area & Sensitivity";
bt25="Add";
bt26="OK";
bt27="Close";
bt28="Calibration";
bt29="Set Home";
bt30="Restart";
bt31="Save Configuration";
bt32="Set New Time";
bt33="Upload Configuration";
//
bt_zoom="Zoom Camera";
bt_snap="SnapShot";
bt_dir="On-image PT Control";
bt_flip="Flip Video";
bt_mir="Mirror Video";
bt_aud="Sound On/Off";
bt_pat="Camera Patrol";
bt_pan="Camera Auto Pan";
bt_md="Motion Detection";
//
bt_UL="Move camera up-left";
bt_U="Move camera up";
bt_UR="Move camera up-right";
bt_L="Move camera left";
bt_H="Move camera home";
bt_R="Move camera right";
bt_DL="Move camera down-left";
bt_D="Move camera down";
bt_DR="Move camera down-right";
//PT List
pt_list="None";
//Admin Help
hav001="Administrator Help";
hav002="Linksys Support Page - Download Latest Viewer/Recorder Utility";
hav003="Click here to learn how to configure Port Forwarding in your Linksys Router";
hav004="Adobe website (software for viewing PDF documents)";
///////////////////////////////////////////////////////
/* - Config UI Display Content - */
//basic.htm
bv001="Basic Settings";
bv002="Device Settings";
bv003="Network Settings";
bv004="Wireless Settings";
//
bv005="Device ID:";
bv006="Camera Name:";
bv007="Description:";
bv008="Enable LCD and LED Operations";
bv009="Current Date/Time:";
bv010="Time Zone:";
bv011="Adjust for Daylight Saving Time";
//
bv012="(GMT-12:00) International Date Line West";
bv013="(GMT-11:00) Midway Island, Samoa";
bv014="(GMT-10:00) Hawaii";
bv015="(GMT-09:00) Alaska";
bv016="(GMT-08:00) Pacific Time (US & Canada); Tijuana";
bv017="(GMT-07:00) Arizona";
bv018="(GMT-07:00) Chihuahua, La Paz, Mazatlan";
bv019="(GMT-07:00) Mountain Time (US & Canada)";
bv020="(GMT-06:00) Central America";
bv021="(GMT-06:00) Central Time (US & Canda)";
bv022="(GMT-06:00) Guadalajara, Mexico City,Monterrey";
bv023="(GMT-06:00) Saskatchewan";
bv024="(GMT-05:00) Bogota, Lima, Quito";
bv025="(GMT-05:00) Eastern Time (US & Canda)";
bv026="(GMT-05:00) Indiana (East)";
bv027="(GMT-04:00) Atlantic Time (Canada)";
bv028="(GMT-04:00) Caracas, La Paz";
bv029="(GMT-04:00) Santiago";
bv030="(GMT-03:30) Newfoundland";
bv031="(GMT-03:00) Brasilia";
bv032="(GMT-03:00) Buenos Aires, Georgetown";
bv033="(GMT-03:00) Greenland";
bv034="(GMT-02:00) Mid-Atlantic";
bv035="(GMT-01:00) Azores";
bv036="(GMT-01:00) Cape Verde Is.";
bv037="(GMT) Casablanca, Monrovia";
bv038="(GMT) Greenwich Mean Time: Dublin,Edinburgh,Lisbon,London";
bv039="(GMT+01:00) Amsterdam, Berlin,Bern,Rome,Stockholm,Vienna";
bv040="(GMT+01:00) Belgrade, Bratislava,Budapest,Ljubljana,Prague";
bv041="(GMT+01:00) Brussels, Copenhagen, Madrid, Paris";
bv042="(GMT+01:00) Sarajevo, Skopje, Warsaw, Zagreb";
bv043="(GMT+01:00) West Central Africa";
bv044="(GMT+02:00) Athens, Istanbul, Minsk";
bv045="(GMT+02:00) Bucharest";
bv046="(GMT+02:00) Cairo";
bv047="(GMT+02:00) Harare, Pretoria";
bv048="(GMT+02:00) Helsinki, Kyiv, Riga, Sofia, Tallinn, Vilnius";
bv049="(GMT+02:00) Jerusalem";
bv050="(GMT+03:00) Baghdad";
bv051="(GMT+03:00) Kuwait, Riyadh";
bv052="(GMT+03:00) Moscow, St. Petersburg, Volgograd";
bv053="(GMT+03:00) Nairobi";
bv054="(GMT+03:30) Tehran";
bv055="(GMT+04:00) Abu Dhabi, Muscat";
bv056="(GMT+04:00) Baku, Tbilisi, Yerevan";
bv057="(GMT+04:30) Kabul";
bv058="(GMT+05:00) Ekaterinburg";
bv059="(GMT+05:00) Islamabad, Karachi, Tashkent";
bv060="(GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi";
bv061="(GMT+05:45) Kathmandu";
bv062="(GMT+06:00) Almaty, Novosibirsk";
bv063="(GMT+06:00) Astana, Dhaka";
bv064="(GMT+06:00) Sri Jayawardenepura";
bv065="(GMT+06:30) Rangoon";
bv066="(GMT+07:00) Bangkok, Hanoi, Jakarta";
bv067="(GMT+07:00) Krasnoyarsk";
bv068="(GMT+08:00) Beijing, Chongqing, Hong Kong, Urumqi";
bv069="(GMT+08:00) Irkutsk, Ulaan Bataar";
bv070="(GMT+08:00) Kuala Lumpur, Singapore";
bv071="(GMT+08:00) Perth";
bv072="(GMT+08:00) Taipei";
bv073="(GMT+09:00) Osaka, Sapporo, Tokyo";
bv074="(GMT+09:00) Seoul";
bv075="(GMT+09:00) Yakutsk";
bv076="(GMT+09:30) Adelaide";
bv077="(GMT+09:30) Darwin";
bv078="(GMT+10:00) Brisbane";
bv079="(GMT+10:00) Canberra, Melbourne, Sydney";
bv080="(GMT+10:00) Guam, Port Moresby";
bv081="(GMT+10:00) Hobart";
bv082="(GMT+10:00) Vladivostok";
bv083="(GMT+11:00) Magadan, Solomon Is., New Caledonia";
bv084="(GMT+12:00) Auckland, Wellington";
bv085="(GMT+12:00) Fiji, Kamchatka, Marshall Is.";
bv086="(GMT+13:00) Nuku'alofa";
//
bv087="Configuration Type:";
bv088="Obtain Address Automatically (DHCP)";
bv089="Fixed IP Address";
bv090="IP Address:";
bv091="Subnet Mask:";
bv092="Gateway:";
bv093="Primary DNS:";
bv094="Secondary DNS:";
//
bv095="SSID:";
bv096="Network Type:";
bv097="Channel No:";
bv098="Security:";
bv099="Ad-hoc";
bv100="Infrastructure";
bv101="Check here if you want to update the time automatically through the NTP server from the Internet.";
bv102="NTP Server Address:";
//
//Wsecurity.htm
bwv001="Wireless Security";
bwv002="Security Mode:";
bwv003="WPA Personal";
bwv004="TX Key:";
bwv005="WEP Encryption:";
bwv006="64 Bit Keys (10 Hex chars)";
bwv007="128 Bit Keys (26 Hex chars)";
bwv008="Passphrase:";
bwv009="Authentication:";
bwv010="Open System";
bwv0100="Shared Key";
bwv011="WPA Shared Key:";
bwv012="WPA Algorithm:";
bwv013="(8 to 63 characters)";
bwv014="Key 1:";
bwv015="Key 2:";
bwv016="Key 3:";
bwv017="Key 4:";
bwv018="Disable";
bwv019="WEP";
//
//sys_time.htm
btv001="Set Date/Time";
btv002="PC's Date & Time:";
btv003="Camera Date & Time:";
btv004="New Date:";
btv005="New Time:";
btv006="(hh:mm:ss)";
//ddns.htm
dv001="DDNS Settings";
dv002="SoloLink DDNS";
dv003="Status";
dv004="Use this screen to setup and manage your";
dv005="Linksys DDNS Service";
dv006="Register today for your 90 days free trial period! If you are adding additional devices to your DDNS service,";
dv007="Register today for your 1 year free trial period! If you are adding additional devices to your DDNS service,";
dv008="click here";
dv009="for more information.";
//
dv010="Username:";
dv011="Password:";
dv012="New User? - Click here to Register";
dv013="Forgot your Password?";
dv014="Your Domain:";
dv015="ex: jdoe.ourlinksys.com";
dv016="Device Name:";
dv017="WAN Port:";
dv018="DDNS Service Update:";
dv019="Find Available Port";
//
dv020="Registration Status:";
dv021="Address Update Status:";
dv022="Last Update Attempt:";
dv023="Last Successful Update:";
dv024="Options:";
dv025="(Remove camera from Domain service.)";
//
dv026="Enable DDNS";
dv027="Service Provider:";
dv028="SoloLink";
dv029="DynDNS";
dv030="TZO";
dv0301="FreeDNS";
dv031="DDNS Service";
dv032="Host Name:";
dv033="Account:";
dv034="Check WAN IP Address:";
dv035="starting at";
dv036="(hh:mm)";
//
vv003="Every";
vv004="Minute(s)";
vv005="Hour";
vv006="Hour(s)";
//ddns_findport.htm
dfv001="You need to be connected to the Internet in order to continue.";
//ddns_msg.htm
dmv001="DDNS Setup is now complete.";
// ddns_newuser.htm
duv001="New User Registration";
duv002="Your Camera and PC need to be connected to the Internet to sign up.";
duv003="Please confirm that you are connected to the Internet before continuing.";
// ddns_pwd.htm
dpv001="Password Request";
dpv002="Use this screen to request your username and password.";
dpv003="The information will be E-mailed to the E-mail address you provided when you registered your";
dpv004="SoloLink DDNS Service";
dpv005="account.";
dpv006="Domain Name:";
//ddns_remdevice.htm
drv001="Device Removal";
drv002="This will remove and unregister this device from the";
drv003="You will no longer be able to get to this device from the Internet by name.";
drv004="Are you sure you want to do this ?";
//ftp.htm
fv001="FTP Upload";
fv002="Enable FTP Upload";
fv003="Primary";
fv004="FTP Server:";
fv005="Port:";
fv006="Login Name:";
fv007="Password:";
fv008="Enable Passive Mode";
fv009="File Path Name:";
fv010="Upload to the secondary FTP if the camera can not connect to the primary FTP.";
fv011="Secondary";
fv012="FTP Server:";
fv013="Port:";
fv014="Login Name:";
fv015="Password:";
fv016="Enable Passive Mode";
fv017="File Path Name:";
fv018="Photo:";
fv019="Shot(s)";
fv020="Upload Interval:";
fv021="Every Second";
fv022="Every";
fv023="Seconds";
fv024="Every Minute";
fv025="Minutes";
//image.htm
iv001="Image Settings";
iv002="Video Settings";
iv003="Image Type:";
iv004="Resolution:";
iv005="Video Quality Control:";
iv006="Fixed Bit Rate";
iv0060="1.2 Mb/s";
iv007="Fixed Quality";
iv008="Very High";
iv009="High";
iv010="Normal";
iv011="Low";
iv012="Very Low";
iv013="Max Frame Rate:";
iv0130="f/s";
iv014="Power Line Frequency:";
iv015="(for fluorescent lighting)";
iv016="Adjustments";
iv017="Color Balance:";
iv018="Auto";
iv019="Indoor (Incandescent)";
iv020="Fluorescent (white light)";
iv021="Fluorescent (yellow light)";
iv022="Outdoor";
iv023="Black & White";
iv024="Exposure:";
iv025="Sharpness:";
iv026="Options";
iv027="Flip Image";
iv028="Mirror Image";
iv029="Enable Microphone";
iv030="Enable Time Stamp";
iv031="Enable Text Display";
//options.htm
ov001="Options Settings";
ov002="E-mail Alert";
ov003="Enable E-mail Alert";
ov004="(Send E-Mail Alert when Motion Detected)";
ov005="(Unable to enable this function in the MJPEG mode)";
ov006="Send To:";
ov007="(E-mail Address #1)";
ov008="(E-mail Address #2)";
ov009="(E-mail Address #3)";
ov010='Show "From" as:';
ov011="(E-mail Address)";
ov012="Subject:";
ov013="SMTP Mail Server:";
ov014="(Outgoing Mail Server)";
ov015="My Mail Server Requires Authentication";
ov016="Account Name:";
ov017="Password:";
ov018="Pan/Tilt:";
ov0190="Enable Motion Detection in all position";
ov019="Disable Pan/Tilt while Motion Detection is enabled";
ov020="Disable Motion Detection while position is incorrect";
ov021="Go to Motion Detection position if idle";
ov022="Delay between E-mails:";
ov023="E-Mail Video:";
ov024="Enable";
ov025="Disable";
ov026="Video length:";
ov027="Second(s)";
ov028="Motion Detection:";
ov029="Other";
ov030="Enable UPnP";
ov031="(Discovery Only)";
ov032="Enable Alternate Port";
ov033="(For HTTP/Web connections)";
ov034="Port Number:";
//
//m_detect.htm
ov035="Indicator";
ov036="Threshold";
//pan_tilt.htm
ptv001="Pan/Tilt Settings";
ptv002="Set Preset";
ptv003="Current Position:";
ptv004="Preset Position:";
ptv005="Pan/Tilt Control";
ptv006="Pan/Tilt Movement:";
ptv007="Default Home Position:";
ptv008="Rotation Sequence";
ptv009="Preset";
ptv010="Time";
ptv011="Sequence";
ptv012="On";
ptv013="Off";
//
//presets.htm
ptv014="Set Preset Position";
ptv015="Save Current Position as Preset";
ptv016="Preset No:";
ptv017="Preset Name:";
//pass_wd.htm
pv001="Maintenance";
pv002="Restore Factory Defaults";
pv003="Caution:";
pv004="Any settings you have saved will be lost when the default settings are restored.";
pv005="Restart";
pv006="Firmware Upgrade";
pv007="Firmware:";
pv008="Configuration";
//
pv009="English";
pv010="Spanish";
pv011="German";
pv012="French";
pv013="Italian";
pv014="Portuguese";
pv015="Language";
//
//upg_fw.htm
pfwv001="Upgrade Firmware";
pfwv002="The upgrade firmware file needs to be downloaded and stored on your PC.";
pfwv003="Upgrade File:";
//
//upg_pg.htm
pgv001="Firmware Upgrade in Progress!";
pgv002="Please wait. This could take 4 to 5 minutes.";
pgv003="Progress";
pgv004="Upgrade must NOT be interrupted!";
//user.htm
rv001="Users Settings";
rv0010="Authentication";
rv0011="Enable Authentication Check";
rv002="Administrator";
rv003="Admin";
rv004="User List";
rv005="User ID";
rv006="User Name";
rv007="Password";
rv008="Confirm Password";
rv009="Pan/Tilt";
rv010="Setup";
rv011="User";
rv012="Demo";
rv013="Viewer";
//status.htm
sv001="Status Settings";
sv002="System";
sv003="Firmware Version:";
sv004="MAC Address:";
sv005="Camera Name:";
sv006="Description:";
sv007="Date/Time:";
sv008="Image";
sv009="Image Type:";
sv010="Resolution:";
sv011="Image Quality:";
sv012="Network";
sv013="Network Type:";
sv014="IP Address:";
sv015="Subnet Mask:";
sv016="Gateway:";
sv017="Primary DNS:";
sv018="Secondary DNS:";
sv019="Wireless";
sv0190="Signal Strength:";
sv020="SSID:";
sv021="Channel:";
sv022="Security:";
sv023="Syslog";
sv024="Syslog Server:";
sv025="Log";
sv026="System Log:";
sv027="Ethernet";
///////////////////////////////////////////////////////
/* - Help Content - */
// - Important: No translation on HTML Tags, sample list as below . . . .
// HTML Tags: , , , , ", , °,
, ,
, , , , , , , , , , ,
,
//hlp_basic.htm
hbh01="Help - Basic";
hbh02="Device Settings";
hbh03="Device ID";
hbh04="This displays the ID for the Wireless-G Internet Camera. This is used by the Setup Wizard and the Viewer and Recorder Utility to identify the Camera.";
hbh05="Camera Name";
hbh06="Enter the preferred name for the Wireless-G Internet Camera. It must not exceed 15 alphanumeric characters.";
hbh07="Description";
hbh08="This field is used for entering a description, such as the location of the Wireless-G Internet Camera. Entering a description will help you identify the Camera. It must not exceed 32 alphanumeric characters.";
hbh09="LCD and LED Operation";
hbh10="Enable this if you want to turn on the LCD and LED.";
hbh11="Current Date/Time";
hbh12="It displays the current date and time. If it's not correct, click the Change button to modify the time settings.";
hbh13="Time Zone";
hbh14="Choose the time zone for your location from the drop-down list.
If your location is currently using Daylight Saving Time, enable the Adjust for Daylight Saving Time checkbox. You must UN CHECK this checkbox when Daylight Saving Time finishes.";
hbh15="Network Time Protocol (NTP)";
hbh16="Enable or disable the Time Server feature as required.
If Enabled, the Wireless-G Internet Camera will contact a Network Time Server at regular intervals and update its internal timer.";
hbh17="NTP Server";
hbh18="Enter the address of the NTP Server.";
hbh19="Network Settings";
hbh20="Configuration Type";
hbh21="Select "Obtain Address Automatically (DHCP)" if your network has a DHCP server.
If you choose "Fixed IP Address", you must configure the IP Address, Subnet Mask, Gateway and DNS.";
hbh22="IP Address";
hbh22a="Assign an IP address that is unique to your local network. There's no need to purchase a separate IP address from your ISP.";
hbh23="Subnet Mask";
hbh23a="The Subnet Mask (also known as IP Mask) must be the same as the Subnet Mask set on the other devices on your Ethernet (wired) network.";
hbh24="Gateway";
hbh24a="Enter the IP address of your network's Gateway.";
hbh25="DNS";
hbh25a="The Primary DNS address is required, while the Secondary DNS is optional. Use the same value(s) as the one(s) used by PCs on your LAN. Normally, your ISP will recommend a DNS.";
hbh26="Wireless Settings";
hbh27="SSID";
hbh28="The SSID is the network name shared among all devices in a wireless network. The SSID must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 alphanumeric characters, which may be any keyboard character. Make sure this setting is the same for all devices in your wireless network. For added security, Linksys recommends that you change the default SSID (linksys) to a unique name of your choice.";
hbh29="Network Type";
hbh30="Select Infrastructure mode if you are connecting the Wireless-G Internet Video Camera to a network access point. Select Ad-Hoc mode if the Wireless-G Internet Camera is connecting directly to a PC or notebook.";
hbh31="Channel No";
hbh32="Select the appropriate channel from the list provided to correspond with your network settings, between 1 and 13 (in Europe). All devices in your wireless network must use the same channel in order to function correctly.
Note: In Infrastructure mode, you cannot specify a channel setting on the Wireless-G Internet Camera. It will automatically be configured to the station you are connecting the Wireless-G Internet Camera to.";
hbh33="Security";
hbh34="It displays the current security setting for Wireless connections.
Click the Edit Security Settings button to configure the security settings.";
//hlp_ddns.htm
hdh01="Help - DDNS";
hdh02="Use this feature to access the Wireless-G Internet Camera from a remote location.";
hdh03="ATTENTION";
hdh04="- To complete the DDNS Service setup, port forwarding needs to be configured in your router. Click here to learn how to configure port forwarding on the Linksys Router -";
hdh05="http://www.linksys.com/portfwd";
hdh06="DDNS";
hdh061="(TZO, DynDNS, or FreeDNS)";
hdh07="DDNS Enable/Disable";
hdh08="Enable or disable the DDNS function, as required.
Only enable this feature if you have registered for the DDNS Service with a DDNS Server provider.";
hdh09="Web Site Button";
hdh10="Click this button to open a new window and connect to the Web site for the selected DDNS service provider.";
hdh11="User Name";
hdh12="Enter the user name you provided when you registered with the SoloLink DDNS Service.";
hdh13="Password";
hdh14="Enter your password for the SoloLink DDNS Service.";
hdh15="Your Domain";
hdh16="Enter the Domain Name allocated to you by the SoloLink DDNS Service. If you registered jdoe as your unique name, then your domain is: jdoe.ourlinksys.com.";
hdh17="Device Name";
hdh18="Enter the Device Name registered with the SoloLink DDNS Service. Remember that to access your camera, you need to have the device name in front of your Domain. For example: if your device name is cam1, then the URL you would use to access the camera would be: cam1.jdoe.ourlinksys.com";
hdh19="Note: If this is your second camera that you are adding to your SoloLink DDNS Service, make sure that you enter a different device name. For example: cam2.jdoe.ourlinksys.com";
hdh20="WAN Port";
hdh21="Enter the number of the available port that can be used for the SoloLink DDNS Service. This should be the same as the Alternate Port set on the Options screen. If you are setting up a second Camera, make sure that it is assigned to a different port than that of your first device.";
hdh22="Note: If this is your second camera which you are adding to your SoloLink DDNS Service, make sure that you enter a different port number than that of your first Camera. Don't forget to set port forwarding as well.";
hdh23="DDNS Service Update";
hdh24="Choose the desired time for the service update.";
hdh25="Displays the status for the Camera's use of the SoloLink DDNS Service.";
hdh26="DDNS (TZO or DynDNS)";
hdh27="Host Name";
hdh28="Enter the host name (Domain Name) allocated to you by the DDNS Server provider.";
hdh29="Account";
hdh30="Enter the login name for the DDNS account.";
hdh31="Password";
hdh32="Enter the password for the DDNS account.";
hdh33="Check WAN IP Address";
hdh34="Set the schedule for checking if the Internet IP address has changed. If the IP address has changed, the DDNS Server will be notified.";
hdh35="Adding Additional Devices to your SoloLink DDNS Service";
hdh36="NOTE: If you are adding additional devices";
hdh37="(for example, a second Camera) to your SoloLink DDNS Service, enter your SoloLink User Name, Password, and Your Domain in the SoloLink DDNS Page. Make sure the second Camera uses a device name and WAN port different than what the first Camera uses. Click the "Apply" button to register the new device. You also need to add another port forwarding entry on the Linksys Router for this new device.";
//hlp_ftp.htm
hfh01="Help - FTP Upload";
hfh02="FTP Upload";
hfh03="Enable FTP Upload";
hfh04="Check the box to enable the Primary/Secondary FTP Alerts feature.";
hfh05="Enable Secondary FTP Upload";
hfh06="Check the box to upload to the secondary FTP if the camera can not connect to the primary FTP.";
hfh07="FTP Server";
hfh08="Enter the address of the Primary/Secondary FTP Server.";
hfh09="Port";
hfh10="Enter the Port of the Primary/Secondary FTP Server to be connected.";
hfh11="Login name";
hfh12="Enter the Login name for the Primary/Secondary FTP server.";
hfh13="Password";
hfh14="Enter the password for the Primary/Secondary FTP server.";
hfh15="Photo";
hfh16="Enter the desired photo shot here.";
hfh17="Passive mode";
hfh18="Check the box to enable the Passive mode feature of the Primary/Secondary FTP.";
hfh19="File Path name";
hfh20="Enter the file path/name of the Primary/Secondary FTP.";
hfh21="Upload interval";
hfh22="Select the desired option for the upload interval.";
//hlp_image.htm
hih01="Help - Image";
hih02="Video Settings";
hih03="Image Type";
hih04="Select the desired image type, MPEG-4 or MJPEG.";
hih05="Resolution";
hih06="Select the desired video resolution format. The default resolution is set to 320×240.";
hih07="Video Quality Control";
hih08="Fix bit rate: Select the desired fix bit rate. The default bit rate is set to 1.2 Mbps.";
hih09="Fix quality: Select the desired fix quality. The default fix quality is set to Normal.";
hih10="Note: Higher image quality requires more bandwidth.";
hih11="Max Frame Rate";
hih12="Select the desired maximum frame rate. The default maximum frame rate is set to 30 fps.
Note: Higher frame rate requires more bandwidth.";
hih13="Power line frequency";
hih14="Select the power line frequency (50Hz or 60Hz) used in your region, to improve the picture quality under fluorescent lighting.";
hih15="Adjustments";
hih16="Color Balance";
hih17="Select the desired option to match the current environment and lighting.";
hih18="Exposure";
hih19="If necessary, you can adjust the exposure to obtain a better image. For example, if the camera is facing a bright light, the image may be too dark. In this case, you can increase the exposure.";
hih20="Sharpness";
hih21="Select the desired option for the sharpness. You can select a Sharpness value between -3 and 3.";
hih22="Options";
hih23="Flip Image";
hih24="Enable this feature if you want to rotate the image 180° on the vertical axis.";
hih25="Mirror Image";
hih26="Enable this feature if you want to rotate the image 180° on the horizontal axis.";
hih27="Microphone";
hih28="Enable audio by checking this checkbox. Using Audio will increase the bandwidth requirements slightly.";
hih29="Time Stamp";
hih30="Enable this feature by checking the checkbox. This will display the time on the video image.";
hih31="Text Display";
hih32="If you want text to be displayed on the video image, enable this feature by checking the checkbox. You can enter text up to 20 characters in length. This feature is often used to identify the Camera when multiple Cameras are installed.";
//hlp_opt.htm
hoh01="Help - Options";
hoh02="E-Mail Alerts";
hoh03="Enable";
hoh04="If enabled, e-mails are sent when motion is detected. You can include a short video with each mail by using the E-mail Video option.
Note:
Motion detection can be triggered by rapid changes in lighting levels, as well as by moving objects. For this reason, it should only be used indoors.";
hoh05="Send To";
hoh06="Enter at least one (1) e-mail address; the 2nd and 3rd addresses are optional. The e-mail alert will be sent to the e-mail address or addresses specified here.";
hoh07='Show "From" as';
hoh08="Enter the e-mail address to be shown in the From field when the e-mail is received.";
hoh09="Subject";
hoh10="Enter the desired text to be shown as the subject for the E-Mail when it is received. This text can not exceed 48 alphanumeric characters.";
hoh11="SMTP Mail Server";
hoh12='Enter the address and port of the SMTP (Simple Mail Transport Protocol) server to be used to send E-Mail.
If the SMTP Server requires a "login" in order to send mail, check the box next to My Mail Server Requires Authentication and enter your login name and password for the SMTP server. (This is usually the same as the POP3 server used to receive e-mail.)';
hoh13="Pan/Tilt";
hoh14="This option is only available if your camera is fitted with a Pan/Tilt control. If available, select the desired option to resolve conflict between the Pan/Tilt and Motion Detection features.";
hoh15="Delay between E-mails";
hoh16="Use this to ensure your e-mail inbox is not flooded with e-mail alerts. Select the desired time delay between e-mail alerts.";
hoh17="E-Mail Video";
hoh18="Enable this if you wish to have a short video included with the e-mail.
If enabled, select the desired time duration for the e-mail video length.";
hoh19="Set Area & Sensitivity Button";
hoh20="Click this button to enter the motion detection sub-screen. You can set the area or areas of the video image to be examined, and adjust the sensitivity of detection for each area.
Note: Motion detection can be triggered by rapid changes in lighting condition, as well as by moving objects. For this reason, it should only be used indoors.";
hoh21="Others";
hoh22="UPnP";
hoh23="If Enabled, the Wireless-G Internet Camera will broadcast its availability through UPnP. UPnP compatible systems such as Windows XP will then be able to detect the presence of the Wireless-G Internet Camera.";
hoh24="Alternate Port";
hoh25="Enable/Disable
If enabled, HTTP connections (from your Web Browser or the Viewer and Recorder utility) can use this port instead of port 80 (the standard HTTP port) to access the camera.
If using your Web browser, you need to specify this port when you connect: http://ip_address:port_number
e.g. http:/203.200.34.26:1024
Port Number
Enter the desired port, in the range 1024 to 65534. The default is 1024.
If you already have a Web Server on your LAN, then you should enable the Alternate Port and use this port number instead of port 80.";
//hlp_pan.htm
hpth01="Help - Pan/Tilt";
hpth02="Set Preset";
hpth03="Set Positions";
hpth04="Set the desired position through adjusting the control panel.";
hpth05="Calibration Button";
hpth06="Click this button to reset the calibration of Pan/Tilt area.";
hpth07="Set Home Button";
hpth08="Set the desired position and then click this button to set Home position.";
hpth09="Current Position";
hpth10='Name the current desired position and then click the "Add" button to add into the preset list.';
hpth11="Delete Preset Position";
hpth12="Select the preset position you don't need and then click the "Delete" button to remove.";
hpth13="Pan/Tilt Control";
hpth14="Pan/Tilt Movement";
hpth15='Enable "On" if you want to use the Pan/Tilt Movement feature.';
hpth16="Default Home Position";
hpth17="Click this button to reset Default Home Position.";
hpth18="Rotation Sequence";
hpth19="This feature determines how the camera will move when it is set to "Rotate". You can set a number of Preset Positions; the camera will go to the first position, then move through the list of preset positions until it is finished. The camera will stop at the last position in the list.
To create the Preset Sequence, select the desired Preset Position in the left column, and click the "Add >>" button. Repeat until the desired sequence is complete. Note that you can add the same Preset Position more than once; this can be used to make the camera stay longer at one position.
To delete a position from the Sequence, select the desired position and click the "Delete" button.";
hpth20="Time";
hpth21="This determines how long the camera will stay at each position while executing the sequence. Set this to the desired value.";
//hlp_pwd.htm
hph01="Help - Maintenance";
hph02="Restore Factory Defaults";
hph03="Restore Defaults Button";
hph04="Click this button will reset the camera to it's factory default settings.";
hph05="Restart";
hph06="Restart Button";
hph07="Click this button to restart the camera.";
hph08="Firmware Upgrade";
hph09="Upgrade Firmware Button";
hph10="Click this button to upgrade the Firmware settings in the sub-screen.";
hph11="Configuration";
hph12="Save Configuration Button";
hph13="Click this button to save the configuration file.";
hph14="Upload Configuration Button";
hph15="Click this button to upload the configuration file.";
hph16="Select the desired language mode and click the Change button to setup.";
//hlp_status.htm
hsh00="Help - Status";
hsh01="System";
hsh02="Firmware version";
hsh03="The version of the firmware currently installed is displayed.
If you have downloaded a new Firmware Upgrade file, you can click the Upgrade Firmware button from the Help page. Note: You must first be logged in to the Setup page as an administrator.";
hsh04="MAC Address";
hsh05="This displays the current MAC Address of the Wireless-G Internet Video Camera.";
hsh06="Camera Name";
hsh07="This shows the name of the Wireless-G Internet Camera.";
hsh08="Description";
hsh09="This shows the description of the Wireless-G Internet Camera.";
hsh10="Date/Time";
hsh11="Displayed here is the current date and time, according to the Wireless-G Internet Camera internal clock.";
hsh12="Image";
hsh13="Image Type";
hsh14="This displays the compression type of the video stream.";
hsh15="Resolution";
hsh16="This displays the image size of the video stream.";
hsh17="Image Quality";
hsh18="This displays the image quality of the video stream.";
hsh19="Network";
hsh20="Network Type";
hsh21="Shown here is the Network Type used by the Wireless-G Internet Camera.";
hsh22="IP Address";
hsh23="Shown here is the IP Address of the Wireless-G Internet Camera.";
hsh24="Subnet Mask";
hsh25="Shown here is Subnet Mask for the above IP Address.";
hsh26="Gateway";
hsh27="This is the IP Address of the Gateway used by the Wireless-G Internet Camera.";
hsh28="Primacy DNS";
hsh29="The IP address of the primacy Domain Name Server.";
hsh30="Secondary DNS";
hsh31="The IP address of the secondary Domain Name Server.";
hsh32="Wireless";
hsh320="Signal Strength";
hsh321="This shows the wireless signal strength.";
hsh33="SSID";
hsh34="This is the wireless SSID of the Wireless-G Internet Camera.";
hsh35="Channel";
hsh36="This shows the wireless channel currently used.";
hsh37="Security";
hsh38="This indicates whether wireless security is enabled or disabled.";
hsh39="Syslog";
hsh40="Enable Syslog";
hsh41="Check the box to enable the Syslog feature.";
hsh42="Syslog Server";
hsh43="Enter the address of the Syslog Server.";
hsh44="Log";
hsh45="System Log";
hsh46="This displays system activities. Click the Clear Log button to erase allthe entries in the System Log.";
//hlp_user.htm
huh01="Help - Users";
huh02="User List";
huh020="Click to enable authentication check which applies to all users.";
huh03="User Name";
huh04="Enter the name for the user here. Spaces, punctuation, and special characters must NOT be used in the name.";
huh05="The name is case insensitive (case is ignored), so you can not have 2 names which differ only by case.";
huh06="User Password";
huh07="The password for the user.";
huh08="Confirm Password";
huh09="Re-enter the password for the user, to ensure it is correct.";
huh10="Pan/Tilt Control";
huh11="Click to allow user control PAN and TILT function.";
huh12="Setup Control";
huh13="Click to authorize user control as an administrator.";
huh14="Add and Delete Buttons";
huh15="Use the Add and Delete buttons to manage the user properties.";